Initial Setup

When you first log in to the web console, the initial settings page will appear for Software License Agreement, License and System Registration, OTP Settings and Account Settings.

Note

The initial setting of the web management console needs to be set on only one of several servers to be configured as a domain. The rest of the servers only need to complete the initial setting of the command.

Initial Login

Connect to the web console using the initial account ID and password and specify the initial settings in order.

1. Connect to the web console. The address is displayed in [Connect Web URL] after completing CPP server installation.

• https://192.168.*.*:8803

2. Enter the initial account ID and password you received from the place of purchase:

• Initial Account: ***
• Password: **********

3. Agree to Software License Agreement to use AhnLab CPP in Step 1.

4. Enter the information in Step 2. License and System Registration.

Note

The serial number comes with the CPP you purchased.

• Serial Number: Enter the serial number of CPP Management.
• Company Name: Enter the company name.
• User Name: Enter the user name.
• Domain Name: Enter the domain name.
• Primary DNS Server Address: Enter the company's DNS server address in the format of IPv4 or IPv6 address, or domain name. e.g.) ahnlab_domain
• Secondary DNS Server Address 1 and 2: Enter the secondary DNS server address in the format of IPv4 or IPv6 address, or domain name.

5. Specify Step 3. OTP Settings. To use OTP, enable One-time Password and enter the following fields. If disabled , you cannot use it.

• Email Server IP Address: Enter the company's email server address in the format of IPv4 or IPv6 address. e.g.) 192.168.0.12, 2001:0DB8:0::0:1428:57ab
• Port Number: Enter the email server port number. It must be between 1 and 65535. e.g.) 25
• SSL: Enable SSL to use it. It is disabled by default.
• ID: Enter the email server's account ID.
• Password: Enter the email server's account password.
• Sender's Email Address: Enter the email address of the sender to send the OTP. e.g.) ems5@ahnlab.com

Note

If you enabled OTP, you can use OTP at Login:. If disabled, you cannot use it.

6. Create an account in Step 4. Account Settings. After creating a new account, you need to re-login with the new account.

• ID: Enter the account ID. The ID must be between 5 to 10 characters.
• Password: Enter the password. The password must be up to 10 characters and be a combination of alphanumeric and special characters.

Note

- Must be 9 to 30 characters long and contain letters, numbers and special characters
- No more than 3 repeated characters
- No more than 4 consecutive numbers
- No more than 3 key sequences
- No last 3 previously used passwords

• Confirm Password: Confirm the password.
• Name: Enter the administrator's name. The name must be between 1 to 128 characters..
• Email: Enter the administrator's email address. (e.g.: 123@ahnlab.com)
• Phone: Enter the administrator's phone number. (Numbers and hyphen only.)
• Allowed IP Address 1: Specify the IP address or IP address range the administrator can log in from in IPv4 or IPv6 format. The administrator can only login from the specified IP address. e.g.) 172.20.9.1
• Allowed IP Address 2: Enter an additional IP address the administrator can log in from in IPv4 or IPv6 format. e.g.) 172.20.9.2

Note

The administrator can log in only from the PC with the allowed IP address. Login is not allowed from an "unspecified" IP address.

• Login Timeout: Enter the timeout period (1 to 999 mins) for a login session. The administrator will be automatically logged out after the specified time of inactivity.
• Account Lockout after Failed Login Attempts: Enter the account lockout period (5 to 10 mins). The administrator account will be locked out (5-10 mins) when you fail to log in 3 times in a row.
• Password Valid Time: Enter password valid period. Enter between 30 to 180 days. The default is 180 days.
• OTP at Login: Enable/Disable OTP at login. If you Enable OPT at Login, OTP authentication is needed at login. Enable OTP Authentication and click Send OTP to send OTP to the email specified in Step 3. OTP Settings.
• Enter OTP: Enter the OTP you received via email and click Confirm. If you enter the wrong OTP, an error message will appear.

7. Re-login with the new account.