Update

Configure the update settings of V3 Net for Linux.

To configure the update settings:

1. Click Policy on the top.
2. Select the Security Program Policy tab.
3. Click Add > Anti-Malware Policy > V3 Net > Update.
4. Under the General section, configure the general update settings

• Enable automatic updates: Check whether the agent is updated after booting the computer by connecting to the update server within 5 to 30 minutes.
• Update every: Run the update by connecting to the update server at the specified time. The update interval can be set from 1 hour to 24 hours. The default value is 3 hours.
• Enable scheduled updates: Run the update at a specified time.

5. Under the Advanced section, configure the advanced settings of update.

• Always update the security product when updating engine: Downloads the V3 patch files when performing the update.
• Show results when complete: Displays the update information when the update is completed. You can view the information on the updated product and the engine.
• Check integrity of the patch files: Scan the downloaded files for file damage or data integrity.
• Update Server: Use a specific server for manual updates.
• Update via user-defined server: Downloads update files by configuring a user-defined server in the network environment where a default server is not accessible. The server must start with http://(https://) and be in IP address or domain address format. (e.g.:  https://ahnlab.com, http://172.100.100.1:8888)

6. After configuration, click Save.
7. Click OK.