Update

Configure the update settings of the agents.

To configure the update settings:

1. Click Policy/Advanced Rule on the top.
2. Select the Policy tab.
3. Click Add > V3 Policy > V3 Net 9.0.
4. To configure the data storage settings, go to Maintenance > Update, and specify the following fields:

• Enable automatic updates: Check whether the agent is updated after booting the computer by connecting to the update server within 5 to 30 minutes.
• Update every: Run the update by connecting to the update server at the specified time. The update interval can be set from 1 hour to 24 hours. The default value is 3 hours.
• Enable scheduled update: Run the update at a specified time.

5. To configure the advanced settings of update, go to Maintenance > Update > Advanced Settings, and specify the following fields.

• Download V3 patch file when updating: Download patch files for V3 programs when updating.
• Check data integrity of update files: Check the integrity of downloaded update files.
• Apply stable updates (Do not use the latest version): Download the previous version of update files.
• Use a specific server for manual updates: Select a way to update.
• EPP server address: Use the EPP server as an update server.
• User-defined Server Address: Download update files through a server defined by a user when it is difficult for a system to connect to the default server.
• Update Retry: Specify the number of update retry. The default value is 15. You can enter between 1 and 99.

6. After configuration, click Save. If you want to get back to the default settings, click Default.
7. When the <Add Policy> window appears, select a target to apply the policy.
8. When a confirming message appears, click OK.