Managing Network Block

Block network or disable network block in real-time when the agent is using V3's firewall. Block Network prevents malware from spreading by blocking the network of agents from which abnormal traffic was detected.

Note

Send the command to Block Network from Detection Status > Detection > Agent.

Block Network

To block the agent's network:

1. Log in to the web console.
2. Go to Management > Agent.
3. Select Domain/Group, or send Block Network command to the agent as below:

• Right-click on Domain/Group and click V3 > Block Network.

•  From the agent list, right-click on the agent to block network and click Block Network, or click Send Management Command on the top and then V3 > Block Network.

4. The message, "Do you want to block the network of the agent?", will appear. Click Yes to block the network, and if not, click  No.

Caution

If you block the network, the network connection will be blocked until you disable it.

Disable Network Block

To disable network block:

1. Log in to the web console.
2. Go to Management > Agent.
3. Select Domain/Group, or send Disable Network Block command to the agent as below:

• Right-click on Domain/Group and click V3 > Disable Network Block.

•  From the agent list, right-click on the agent to disable network block and click Disable Network Block, or click  Send Management Command on the top and then V3 > Disable Network Block.

4. The message, "Do you want to disable network block of the agent?", will appear. Click Yes to disable the network block, and it not, click  No.

Caution

Network Block and Disable Network Block are only available if V3's firewall is running on the agent.